F-4E / F-4G Phantom II Canopy & Wheels paint masks

F-4E / F-4G Phantom II Canopy & Wheels paint masks for the Meng (LS-017, LS-015) kit

Re-usable die-cut paint masks

Interior + Exterior masks are included

The set includes one sheet of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn’t leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be used over and over again. It is flexible and easily applied over curved surfaces. Semi-transparent for easy and accurate placing.

F-4 Phantom II

from MENG Model is one of the most attractive new 48th scale toolings of the legendary twin jet. Initially MENG Model released F-4G and later on – F-4E. Both are based on the same platform and feature minor differences. The kit competes with Zoukei-Mura F-4E as well as their Wild Weasel option. Both variants are developed over the E model, which features elongated nose and it is considered a second-generation Phantom, although the improvements are not that radical. Nevertheless, the plane was upgraded to a level that allowed it to remain in service until the 2020s, with possibility for even longer active duty. F-4E is the sole variant remaining in active condition as of present day.

Canopy

and Wheels paint mask set from DN Models covers both MENG Model releases – F-4E and F-4G. This set features interior and exterior masks for the canopy, unlike the masks provided in the kit, which are only for the exterior. This paint mask set is designed specifically for the abovementioned MENG kits and should not be used with any other tooling of the F-4E or F-4G. The masking set covers the wheels and other clear parts featured on the exterior of the jet. If carefully applied and removed, the masks can be used for more than once.

By DN Models